← Visual Library
Problems · RP-DIA-006BESPOKE VISUAL

Leak Under Kitchen Sink: Where Is It Coming From? | RoughPlumb

Separate pressurized supply leaks from drain leaks and faucet-hose leaks.

START HEREUse the visual to identify the likely area involved, then compare the checks and related guides below.
RP-DIA-006Leak Under Kitchen SinkSIMPLIFIED SYSTEM CONCEPT
1 Fixture outlet2 Tailpiece3 P-trap4 Trap arm / wall drain5 Supply / cabinet relationship

What You’re Looking At

Separate faucet, supply-line, basket-strainer, P-trap and wall-drain leaks using controlled tests and visual clues.

How It Works

Leak Under Kitchen Sink is shown as part of the larger plumbing path so a homeowner can see what connects before and after it. Use the visual to identify the component/system relationship first, then use symptoms and timing to narrow the problem.

Common Symptoms

  • Unexpected leakage, noise, odor, slow flow/drainage, poor performance or visible deterioration
  • A symptom that changes when a related fixture or valve is operated

Common Causes

  • Wear, restriction, poor adjustment, failed sealing, incorrect layout or a downstream/upstream system issue
  • A nearby component creating a symptom that appears to come from this part

Common Mistakes

  • Replacing a part before confirming the failure path
  • Changing piping before checking the surrounding system relationship
  • Treating a simplified visual as a jurisdiction-specific installation drawing

What the Visual Shows

  1. Faucet/supply connection area
  2. Pull-down hose/sprayer path
  3. Basket-strainer/drain body
  4. P-trap and slip joints
  5. Wall-side drain connection

What You Can Check

  • Dry every visible component
  • Run the faucet without draining the sink to test supply/faucet paths
  • Then drain a filled basin to test the drain path
  • Move the pull-down hose through its range while watching for drips

Safety & Scope

Local plumbing codes and manufacturer instructions apply. Shut off water/energy where required and escalate concealed, sewage, structural, gas, electrical or uncontrolled-leak conditions.

When to Call a Plumber

Call a qualified plumber when the problem involves concealed piping, sewage, uncontrolled leakage, structural work, water-heater safety devices, uncertain code requirements, or multiple fixtures/system branches.

KEEP LEARNING

Related Visual Guides